Hello Genodians!

I tried to build Genode for Gumstix Overo platform. I added new build target foc_overo and implemented framebuffer and touchscreen drivers. I added my changes to my fork on Github https://github.com/iloskutov/genode

First question about core. Core for Fiasco.OC used  LD_TEXT_ADDR = 0x140000 in base-foc/src/core/target.inc. In Overo memory locations starting at 0x80000000. I think, I need to set LD_TEXT_ADDR = 0x80140000. I added it to base-foc/src/core/arm/target.inc but it applied for all ARM targets. How can I set it for my Overo target only?

In our project we use Chestnut43 board for prototype. This board has 4.3” LCD 480x272 pixels. I get display configuration for this LCD from Linux driver. Display work, picture is drawing, colors are correct. But sometimes window drawn with distortion (normal drawing http://dl.dropbox.com/u/8558928/pic_1.jpg , distorted: http://dl.dropbox.com/u/8558928/pic_2.jpg http://dl.dropbox.com/u/8558928/pic_3.jpg ). I can’t solve this yet. Maybe I have wrong configuration for display controller.

Touchscreen based on ADS7846 chip. I wrote simple driver. How can I do calibration implementation?  I see several solutions:
1. Create new input event for touchscreen. Then driver can to send raw data to Nitpicker. Nitpicker translate this data to screen coordinates use calibration constants which must be loaded from some application.
2. Calibration data must be loaded to the touchscreen driver. But how make it correct?
Maybe you can to offer best solution?

Drivers implementation are simple. I don’t write drivers for GPIO and McSPI as independent part yet.

For test platform I wrote simple Qt application. I don’t understand how to work resolution dependency. Where need I write all dependencies for automatic build my target. I used qt4/run/qt4.run as base for my run target. Execution “make run/qt_test” failed with error “cannot stat `bin/dejavusans.lib.so'”. Not all libraries was built. If I execute “make run/qt4” previously then my qt_test built without error.