On Sat, Mar 31, 2018, 10:32 AM Chris Rothrock <cgrothrock@...9...> wrote:
if you don't load the usb_drv, does the platform_drv still run out of caps?------------------------------------------------------------------------------On Sat, Mar 31, 2018 at 2:46 AM, Nobody III <hungryninja101@...9...> wrote:I've been testing Genode's current compatibility with my desktop computer, which has an AMD 9xx chipset. While the framebuffer driver works fine, usb_drv does not.Here's the full output:Genode 18.02-2-g6888094f6 <local changes>16299 MiB RAM and 63253 caps assigned to init[init -> acpi_drv] Found MADT[init -> acpi_drv] MADT IRQ 0 -> GSI 2 flags: 0[init -> acpi_drv] MADT IRQ 9 -> GSI 9 flags: 15[init -> acpi_drv] Found MCFG[init -> acpi_drv] MCFG BASE 0xe0000000 seg 0x0 bus 0x0-0xff[init -> platform_drv] 0:2.0 - bridge 1:0.0[init -> platform_drv] 0:9.0 - bridge 2:0.0[init -> platform_drv] 0:14.4 - bridge 3:0.0[init -> platform_drv] 0:15.0 - bridge 4:0.0[init -> platform_drv] 0:15.3 - bridge 5:0.0[init -> usb_drv] Could not read screen resolution in config node[init -> usb_drv] Configured HID screen with 0x0 (multitouch=false)[init -> usb_drv] No <storage> config node found - not starting the USB Storage (Block) service[init -> usb_drv] No <nic> config node found - not starting the USB Nic (Network) service[init -> usb_drv] No <raw> config node found - not starting external USB service[init -> usb_drv] Enabled UHCI (USB 1.0/1.1) support[init -> usb_drv] Enabled OHCI (USB 1.0/1.1) support[init -> usb_drv] Enabled EHCI (USB 2.0) support[init -> usb_drv] Enabled XHCI (USB 3.0) support[init -> platform_drv] Warning: Out_of_caps during Device_component construction[init -> platform_drv] Warning: Out_of_caps during Device_component construction[ 0] sys_assign_pci: Invalid Hint (0x200)[init -> platform_drv] Error: usb_drv -> : assignment of PCI device 2:0.0 failed phys=0xe0200000 virt=0x80400000[init -> usb_drv] ioremap: mapped phys 0xfe100000 (size 32768) to virt 0x20000[init -> usb_drv] dev_info: xHCI Host Controller[init -> usb_drv] dev_info: new USB bus registered, assigned bus number 1[init -> usb_drv] dev_info: hcc params 0x040040a5 hci version 0x100 quirks 0x00000010[init -> platform_drv] 2:0.0 adjust IRQ as reported by ACPI: 10 -> 48[init -> platform_drv] 2:0.0 uses MSI 64bit, vector 0x9f, address 0xfee10000, maskable[init -> usb_drv] dev_info: USB hub found[init -> usb_drv] dev_info: 4 ports detected[init -> usb_drv] dev_info: xHCI Host Controller[init -> usb_drv] dev_info: new USB bus registered, assigned bus number 2[init -> usb_drv] dev_info: We don't know the algorithms for LPM for this host, disabling LPM.[init -> usb_drv] dev_info: USB hub found[init -> usb_drv] dev_info: 4 ports detected[ 0] sys_assign_pci: Invalid Hint (0xb2)[init -> platform_drv] Error: usb_drv -> : assignment of PCI device 0:16.2 failed phys=0xe00b2000 virt=0x1000[init -> usb_drv] ioremap: mapped phys 0xfe204000 (size 256) to virt 0x17000[init -> usb_drv] dev_info: EHCI Host Controller[init -> usb_drv] dev_info: new USB bus registered, assigned bus number 3[init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround[init -> platform_drv] 0:16.2 adjust IRQ as reported by ACPI: 11 -> 17[init -> platform_drv] 0:16.2 uses IRQ, vector 0x11, non-maskable[init -> usb_drv] dev_info: irq 130, io mem 0xfe204000[init -> usb_drv] dev_info: USB 2.0 started, EHCI 1.00[init -> usb_drv] dev_info: USB hub found[init -> usb_drv] dev_info: 4 ports detected[ 0] sys_assign_pci: Invalid Hint (0x9a)[init -> platform_drv] Error: usb_drv -> : assignment of PCI device 0:13.2 failed phys=0xe009a000 virt=0x1000[init -> usb_drv] ioremap: mapped phys 0xfe207000 (size 256) to virt 0x28000[init -> usb_drv] dev_info: EHCI Host Controller[init -> usb_drv] dev_info: new USB bus registered, assigned bus number 4[init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround[init -> platform_drv] 0:13.2 adjust IRQ as reported by ACPI: 11 -> 17[init -> platform_drv] 0:13.2 uses IRQ, vector 0x11, non-maskable[init -> usb_drv] dev_info: irq 131, io mem 0xfe207000[init -> usb_drv] dev_info: USB 2.0 started, EHCI 1.00[init -> usb_drv] dev_info: USB hub found[init -> usb_drv] dev_info: 5 ports detected[ 0] sys_assign_pci: Invalid Hint (0x92)[init -> platform_drv] Error: usb_drv -> : assignment of PCI device 0:12.2 failed phys=0xe0092000 virt=0x1000[init -> usb_drv] ioremap: mapped phys 0xfe209000 (size 256) to virt 0x29000[init -> usb_drv] dev_info: EHCI Host Controller[init -> usb_drv] dev_info: new USB bus registered, assigned bus number 5[init -> usb_drv] dev_info: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround[init -> platform_drv] 0:12.2 adjust IRQ as reported by ACPI: 11 -> 17[init -> platform_drv] 0:12.2 uses IRQ, vector 0x11, non-maskable[init -> usb_drv] dev_info: irq 132, io mem 0xfe209000Also, I get the following message in dmesg on linux (from drivers/usb/host/pci-quirks.c), but not from usb_drv:QUIRK: Enable AMD PLL fixWhat might be going on? Why would usb_drv cause platform_drv to run out of CAPs, even when I assign it 2000 CAPs (instead of 800)?
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main
--Thank You,Chris RothrockSenior System Administrator(315) 308-1637
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main