You're trying to make a second connection to the Block service, but you should be making a second connection to the File_system service. The Block service only provides a random-access chunk of memory, not access to files.
Hi,
I was doing some testing with the 3rd party FFAT file system which
multiplexes clients accessing the file system. This was done in base-hw
on release 15.11.
The first client connected to the file system as expected and two files
were read and processed. When the second client attempted to make a
connection to the Block service, a "could not open block connection"
error was issued by the disk_initialize method in diskio_block.cc.
(partial log below).
The Block service is provided by an sd_card driver (identical to the
omap4 driver for the Panda board). Based on my limited understanding of
the Genode architecture, I would think that is the correct behavior
since the first client is still connected and that the a multiplexer for
the service needs to be provided.
If that is correct, the FFAT file system effectively does not multiplex
client connections in a useful manner, for this scenario. How would one
go about doing that?
Bob Stewart
[init -> pruss_drv] void init_libc_ffat(): using the libc_ffat plugin
[init -> pruss_drv] --- am33xx PRU driver ---
[init -> pruss_drv] PRUSS quota super period 1000000
[init -> pruss_drv] PRUSS quota 199981
[init -> motor_ctl] --- Motor Control application starting ---
[init -> Autopilot] void init_libc_ffat(): using the libc_ffat plugin
[init -> Autopilot] --- Autopilot application starting ---
[init -> sd_card_drv] CID: 0x1d414453 0x44202020 0x02b16703 0xea00d927
[init -> sd_card_drv] RCA: 0x59b4
Quota exceeded! amount=24576, size=12288, consumed=24576
[init -> sd_card_drv] Block::Omap3_driver::Omap3_driver(bool): SDCard
driver getting m
mc1 ready with dma 0
[init -> sd_card_drv] SD card detected
[init -> sd_card_drv] capacity: 60303 MiB
[init -> pruss_drv] Loaded PRU-0 program 123 words
[init -> pruss_drv] Loaded PRU-1 program 337 words
[init -> Autopilot] opening file /Autopilot/ap_config.xml
[init -> Autopilot] could not open block connection
[init -> Autopilot] No file system available
[init] virtual void Genode::Child_policy::exit(int): child "Autopilot"
exited with exi
t value -1
[init -> motor_ctl] Config not set in time
[init] virtual void Genode::Child_policy::exit(int): child "motor_ctl"
exited with exi
t value -2
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
genode-main mailing list
genode-main@...12...ceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main