Hi Christian,

I execute run/demo on base-nova successfully. i have tried to run make run/noux_bash in my nova build directory, but i am not getting command prompt inside my qemu. After displaying the following outputs, it gets stuck.

Here is my output:

[init -> ram_fs] failed to open ROM file "timer"
[init] child "ram_fs" announces service "File_system"
[init -> acpi_drv] void Acpi_table::_parse_tables(T*, Genode::uint32_t) [with T = unsigned int; Genode::uint32_t = unsigned int]: Found MADT
[init -> acpi_drv] MADT IRQ 0 -> GSI 2 flags: 0
[init -> acpi_drv] MADT IRQ 5 -> GSI 5 flags: d
[init -> acpi_drv] MADT IRQ 9 -> GSI 9 flags: d
[init -> acpi_drv] MADT IRQ 10 -> GSI 10 flags: d
[init -> acpi_drv] MADT IRQ 11 -> GSI 11 flags: d
[init -> platform_drv -> device_pd] Device protection domain starting ...
[init -> platform_drv -> device_pd] Device protection domain started
[init] child "platform_drv" announces service "Platform"
[init -> fb_drv] int Framebuffer_drv::map_io_mem(Genode::addr_t, Genode::size_t, bool, void**, Genode::addr_t, Genode::Dataspace_capability*): fb mapped to 1000
[init] child "fb_drv" announces service "Framebuffer"
[init -> fb_drv] Could not open ROM session for module "config"
[init -> fb_drv] Could not obtain config file
[init -> ps2_drv] Using keyboard with scan code set 1 (xlate).
[init -> ps2_drv] Detected ExPS/2 mouse - activating scroll-wheel and 5-button support.
[init -> platform_drv] PS2 uses IRQ, vector 0x1
[init -> platform_drv] PS2 uses IRQ, vector 0xc
[init] child "ps2_drv" announces service "Input"
[init -> fb_drv] Found: VESA BIOS version 3.0
[init -> fb_drv] OEM: SeaBIOS VBE(C) 2011
[init] child "rtc_drv" announces service "Rtc"
[init -> fb_drv] Found: physical frame buffer at 0xfc000000 size: 0x00400000
[init -> fb_drv] int Framebuffer_drv::map_io_mem(Genode::addr_t, Genode::size_t, bool, void**, Genode::addr_t, Genode::Dataspace_capability*): fb mapped to 400000
[init -> fb_drv] Using video mode: 1280 x 1024 x 16
int main(): --- init created, waiting for exit condition ---


What is missing? thanks for your answers in advance!

Best regards,
Abhay

On Tue, Oct 6, 2015 at 9:54 PM, Abhay Amala <amalaabhay@...9...> wrote:

Hi Christian,

Thank you for response.


On Tue, Oct 6, 2015 at 3:23 PM, Christian Helmuth <christian.helmuth@...1...> wrote:
Hi,

On Tue, Oct 06, 2015 at 02:12:16PM +0200, Abhay Amala wrote:
> > Did you sucessfully execute run/demo on base-linux?
>
>
> I have tried to execute run/demo, but the same output, It also throws a
> exception "[init -> fb_sdl] input overflow - resetting queue" and gets
> stuck.

This means we really have an issue with our SDL-based fb_sdl program.
Does the message also appear if you do not move the mouse or use the
keyboard after starting "make run/demo"?

Yes, it displays the same output.
 
May I ask which Linux distribution you're using (output of
lsb_release -cidr)?

Ubuntu 14.04 LTS.

Best regards,
Abhay

Regards
--
Christian Helmuth
Genode Labs

http://www.genode-labs.com/ · http://genode.org/
https://twitter.com/GenodeLabs · /ˈdʒiː.nəʊd/

Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden
Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth

------------------------------------------------------------------------------
_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main