Hello
I am trying to run linux in normal world on genode trustzone. I have changed the run-script of genode to copy the uImage generated from skalk/linux's imx-53 branch instead of downloading (default). I am making uImage with following command:
make uImage LOADADDR=0x70010000
while executing, genode stops after starting virtual machine with following error trace:
```
.
.
[init] child "tz_vmm"
[init] RAM quota: 10203136
[init] ELF binary: tz_vmm
[init] priority: 0
[init -> tz_vmm] Start virtual machine ...
[init -> tz_vmm] Cpu state:
[init -> tz_vmm] Register Virt Phys
[init -> tz_vmm] ---------------------------------
[init -> tz_vmm] r0 = 07000000 [00000000]
[init -> tz_vmm] r1 = f801ff50 [00000000]
[init -> tz_vmm] r2 = ffffffe4 [00000000]
[init -> tz_vmm] r3 = 40002000 [00000000]
[init -> tz_vmm] r4 = 00000000 [00000000]
[init -> tz_vmm] r5 = 00000000 [00000000]
[init -> tz_vmm] r6 = 000000ee [00000000]
[init -> tz_vmm] r7 = 00000000 [00000000]
[init -> tz_vmm] r8 = 00000000 [00000000]
[init -> tz_vmm] r9 = 00000000 [00000000]
[init -> tz_vmm] r10 = 00000000 [00000000]
[init -> tz_vmm] r11 = 00000000 [00000000]
[init -> tz_vmm] r12 = 00000000 [00000000]
[init -> tz_vmm] sp = 00000000 [00000000]
[init -> tz_vmm] lr = 00000000 [00000000]
[init -> tz_vmm] ip = 0040dfe8 [00000000]
[init -> tz_vmm] cpsr = 60000093
[init -> tz_vmm] sp_und = 00000000 [00000000]
[init -> tz_vmm] lr_und = 8000800c [00000000]
[init -> tz_vmm] spsr_und = 00000093 [00000000]
[init -> tz_vmm] sp_svc = f801ff4c [00000000]
[init -> tz_vmm] lr_svc = 0040bc97 [00000000]
[init -> tz_vmm] spsr_svc = 00000000 [00000000]
[init -> tz_vmm] sp_abt = 00000000 [00000000]
[init -> tz_vmm] lr_abt = 00000000 [00000000]
[init -> tz_vmm] spsr_abt = 00000000 [00000000]
[init -> tz_vmm] sp_irq = 00000000 [00000000]
[init -> tz_vmm] lr_irq = 00000000 [00000000]
[init -> tz_vmm] spsr_irq = 00000000 [00000000]
[init -> tz_vmm] sp_fiq = 00000000 [00000000]
[init -> tz_vmm] lr_fiq = 00000000 [00000000]
[init -> tz_vmm] spsr_fiq = 00000000 [00000000]
[init -> tz_vmm] ttbr0 = 00000000
[init -> tz_vmm] ttbr1 = 00000000
[init -> tz_vmm] ttbrc = 00000000
[init -> tz_vmm] dfar = 07000000 [00000000]
[init -> tz_vmm] exception = data_abort
[init -> tz_vmm] Could not handle data-abort will exit!
```
Initially I thought I might be giving wrong load address while making uImage, but it seems problem is not that. Can someone help me with what might be possibly going wrong?