I really appreciate your kind response.
As you already mentioned, my situation can be addressed by adjusting two switches’ (SW26 and SW28) configuration.
That is, initially my SABRE was not booted using the u-boot on the sdcard.

After this, I got same error situation described in  http://comments.gmane.org/gmane.os.genode.devel/3171.
Based on your answers in same URL, I could fix and now I can execute ARM TrustZone Demon in i.MX 53 SABRE Tablet.

My Best Regards,
Jaemin Park


2015. 5. 5., 오후 7:07, Stefan Kalkowski <stefan.kalkowski@...1...> 작성:

Hi,

On 04/30/2015 10:33 AM, JaeminPark wrote:
Today, I got Freescale i.MX53 SABRE Tablet and I’d like to make demo as
described “Shortcut” in README
(https://github.com/skalk/genode/blob/i.MX53_tablet_demo/os/src/server/vmm/imx53/README).

After boot-up the tablet, I failed to load image.bin into the device.

It could be a ridiculous question, but please tell me which point I did
wrong.

My procedure was as follows :

1) Download image.bin from URL
in https://github.com/skalk/genode/blob/i.MX53_tablet_demo/os/src/server/vmm/imx53/README

2) Setup sdcard as follows : (sdcard is mounted in /dev/sdb)
   sudo parted /dev/sdb --script mklabel msdos
   sudo parted /dev/sdb --script mkpart primary ext4 5M 100%
   sudo dd if=$(U-BOOT-DIR)/u-boot.imx of=/dev/sdb seek=2 bs=512 conv=fsync
   sudo fdisk -l /dev/sdb
   sudo mkfs.ext4 /dev/sdb1
   sudo udisks --mount /dev/sdb1
   sudo cp image.bin /media/371a8dd7-58c1-4beb-aed3-cb18fb40f7eb/
   sudo udisks –-unmount /dev/sdb1

3) insert sdcard into MMC adapter, and then insert MMC (sdcard) into the
tablet

4) After power up the tablet, U-BOOT prompt (u-boot from MMC is not
used), I did as follows :
   MX53-SMD U-Boot > ext2load mmc 0:1 0x70800000 image.bin
   (hang forever)

So, I couldn’t load image.bin into the tablet, thus I couldn’t boot demo
image in the tablet.

If possible, (for the beginner in this field) please let me know full
procedures to set up the MMC (sdcard) for this demo.

Well, I wonder whether you could boot anything from SD-card on your
tablet (e.g. an image provided by Freescale)? As your u-boot already
hangs when trying to read from MMC.
The things you should investigate: are you sure you interact with the
u-boot from the SD-Card, or maybe the one from the eMMC? You have to
toggle some switches on the board to boot from SD-card.
Next question would be whether mmc 0:1 really targets the SD-Card
instead of an eMMC partition? There are u-boot commands that can help
you, like 'mmcinfo' or something similar.

Regards
Stefan



------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y



_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main


--
Stefan Kalkowski
Genode Labs

http://www.genode-labs.com/ · http://genode.org/

------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main